Продленная лицензия почему-то не подцепилась, вылезло вот это окно http://nullseo.com/images/manual_keitaro9/error-2.png. Какую команду надо выполнить в консоли для Keitaro 9.4.9.5 что не поломать скрипт? Насколько я понимаю вот эту sudo mv /var/www/keitaro/var/license/hash* /tmp
Здравствуйте, giuseppe palmieri, Для начала предоставьте, пожалуйста, больше информации, например: логи, тип редиректа, который используете, как настроена кампания. Чтобы я Вам смог помочь. Можно в ЛС.
P.S.: Достаточно в какой-то один канал связи. Одновременно на почту, форум, ЛС и обратную связь такой необходимости нет. Я все обращения вижу и по мере возможности отвечаю.
*** ОШИБКА ВЫПОЛНЕНИЯ ПРОГРАММЫ ***
Ошибка выполнения текущей команды
Task info:
TASK [bertvv.mariadb : Install packages]
task path: /root/centos_provision-1.4/roles/bertvv.mariadb/tasks/main.yml:15
Field 'msg':
Failure talking to yum: failure: repodata/repomd.xml from mariadb: [Errno
256] No more mirrors to try.
http://yum.mariadb.org/10.4/centos7-a...epomd.xml: [Errno 14]
HTTPS Error 302 - Found
Журнал установки сохранён в ${SCRIPT_LOG}. Настройки сохранены в ${INVENTORY_FILE}. Вы можете повторно запустить \`${SCRIPT_COMMAND}\` с этими настройками после устранения возникших проблем.
ERROR!
Keitaro v9.4.9.5 was not installed. Please run this script again.
Здравствуйте, Juri Anikin, проверил у себя на тестовом сервере - установка прошла успешно с первого раза, без ошибок. Возможно, на вашем сервере были проблемы с сетью либо с него недоступен репозиторий маридб. Проверьте пингом доступность yum.mariadb.org и попробуйте запустить установку Кейтаро еще раз.
проверил у себя на тестовом сервере - установка прошла успешно с первого раза, без ошибок. Возможно, на вашем сервере были проблемы с сетью либо с него недоступен репозиторий маридб. Проверьте пингом доступность yum.mariadb.org и попробуйте запустить установку Кейтаро еще раз.
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
Cannot find a valid baseurl for repo: base/7/x86_64
Выполняется команда `yum install -y deltarpm`
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
Cannot find a valid baseurl for repo: base/7/x86_64
*** ОШИБКА ВЫПОЛНЕНИЯ ПРОГРАММЫ ***
Ошибка выполнения текущей команды
Content of '/tmp/tmp.EWdqyMVlne/current_command.sh':
#!/usr/bin/env bash
set -o pipefail
yum install -y deltarpm
Content of 'current_command.output.log':
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
Cannot find a valid baseurl for repo: base/7/x86_64
Журнал установки сохранён в ${SCRIPT_LOG}. Настройки сохранены в ${INVENTORY_FILE}. Вы можете повторно запустить \`${SCRIPT_COMMAND}\` с этими настройками после устранения возникших проблем.
ERROR!
Keitaro v9.4.9.5 was not installed. Please run this script again.
Похоже, что базовая репка Centos'a приказала долго жить. Сделал фикс. Александр Чехов, попробуйте выполнить команду установки еще раз, должно работать.
Похоже, что базовая репка Centos'a приказала долго жить. Сделал фикс. Александр Чехов, попробуйте выполнить команду установки еще раз, должно работать.
Здравствуйте, mynamers12, для клубной версии Кейтаро нужен именно 7-й Centos. На 9-й не станет, как и на Debian (разве что вручную будете ставить все пакеты и конфигурировать сервер). Также в требованиях по установке, как и для офф версии, указано, что необходим "чистый" сервер, т.е. без панели управления. Скрипт автоустановки самостоятельно развернет Кейтаро на Вашем хосте.
*** ОШИБКА ВЫПОЛНЕНИЯ ПРОГРАММЫ ***
Ошибка выполнения текущей команды
Task info:
TASK [bertvv.mariadb : Install packages]
task path: /root/centos_provision-1.4/roles/bertvv.mariadb/tasks/main.yml:15
Field 'msg':
The following packages have pending transactions: MariaDB-server-x86_64
Журнал установки сохранён в ${SCRIPT_LOG}. Настройки сохранены в ${INVENTORY_FILE}. Вы можете повторно запустить \`${SCRIPT_COMMAND}\` с этими настройками после устранения возникших проблем.
ERROR!
Keitaro v9.4.9.5 was not installed. Please run this script again.[code]
Понимаю , что MariaDB не установилась , попытался установить из другого репозитория , теперь ошибка выглядит так :Complete!
*** ОШИБКА ВЫПОЛНЕНИЯ ПРОГРАММЫ ***
Ошибка выполнения текущей команды
Content of '/tmp/tmp.LYAPngXuUg/current_command.sh':
#!/usr/bin/env bash
set -o pipefail
yum update -y
You may choose to use 'rpm --nodeps -ev <package-name>' to remove
the package which contains the mysqlclient shared library. The
library will be reinstalled by the MariaDB-shared package.
- Install the new MariaDB packages supplied by MariaDB Foundation
- Ensure that the MariaDB server is started
- Run the 'mysql_upgrade' program
This is a brief description of the upgrade process. Important details
can be found in the MariaDB manual, in the Upgrading section.
******************************************************************
error: %pre(MariaDB-server-11.5.2-1.el7.centos.x86_64) scriptlet failed, exit status 1
Verifying : MariaDB-server-10.4.34-1.el7.centos.x86_64 1/2
Verifying : MariaDB-server-11.5.2-1.el7.centos.x86_64 2/2
Complete!
Content of 'current_command.error.log':
Error in PREIN scriptlet in rpm package MariaDB-server-11.5.2-1.el7.centos.x86_64
MariaDB-server-10.4.34-1.el7.centos.x86_64 was supposed to be removed but is not!
Журнал установки сохранён в ${SCRIPT_LOG}. Настройки сохранены в ${INVENTORY_FILE}. Вы можете повторно запустить \`${SCRIPT_COMMAND}\` с этими настройками после устранения возникших проблем.
ERROR!
Keitaro v9.4.9.5 was not installed. Please run this script again.